1.丝杆升降机严禁超载和载人使用。必须有专人操作、管理。
2.进入升降机前需将层门、轿门开到底，以避免推车误撞造成损坏。
3.运送货物要摆放均匀，不能过于偏载以防止货物在运行中滑落或倒塌。
4.升降机层门和轿门必须关门到位，否则电气安全装置不动作，升降机无法运行。
5.升降机在运行中如按了急停按钮，必须再按一次，使之复位，否则升降机无法使用。
6.升降机到层作业完毕后，必须把轿门和层门关到位，便于后者使用。
7.操作工到升降机位置后，如果轿厢不在本层时刻按任意运行按钮做召唤铃使用，工作层应尽快完成工作。
8.在使用过程中，如发现升降机有异常声音和不良现象时，应按急停按钮停止使用，待查明原因排除故障后方可使用。
9.非专业人员不得修理升降机，严禁短接各线路和开关以及手动按接触器和开启层门。
10.操作工应经常打扫升降机内外，保持各部位清洁。
11.使用时如按运行按钮，丝杆升降机未动作而电铃响，请认真检查各门是否到位及召唤盒上红色急停按钮是否误按。
英文如下：
1 lifts forbidden overload and manned use. There must be a special operation, management.
2 enter the lift before the door, car door opening will end, so as to avoid the cart mistakenly hit damage.
3 delivery of goods should be placed evenly, cannot too slant load to prevent the goods in the operation of the slide and collapse.
4 elevator landing doors must be closed in place, otherwise the electrical safety devices do not move, lift can not run.
5 lifts in operation such as pressed the emergency stop button, must press again, to reset, or lift can not use.
6 lifts to layer after work, must put the car door and landing door closed in place, is convenient to use.
7 operators to lift position, if the car is not in the press the run button layer moment do call bell, working layer should finish the work as soon as possible.
8 in the use of the process, such as found in lift has abnormal sound and undesirable phenomena, should press emergency stop button to stop using, to identify the reasons for troubleshooting before use.
9 non professional personnel not to repair Elevator, no short lines and switches and contactors and manually by opening the floor door.
10 operators should be cleaned regularly lift home and abroad, to keep parts of cleaning.
11 when used as press the run button, elevator action and not the bell rings, please carefully check whether the door in place and call box red emergency stop button is pressed mistakenly.
   如需要齿轮加工，蜗轮蜗杆加工，齿条，链轮，同步带轮，尼龙齿轮等减速机配件加工，可以来图纸或实样咨询，国产进口都可加工。更多相关的产品蜗轮蜗杆，齿轮加工，减速机配件加工，微型摆线针轮减速机，齿轮换向器，蜗轮减速机，丝杆升降机，齿轮马达，无级变速机, 精密行星减速机，斜齿轮硬齿面减速机，螺旋锥齿轮减速机,平行轴斜齿轮减速机，斜齿轮-蜗轮蜗杆减速机的参数请联系上海诺广公司，我们将为你提供完美的服务。

更多丝杆升降机的资讯请点击浏览网站链接:http://www.nuoguangsh.com/product/jwm/13.html